{"id":11962,"date":"2023-11-21T14:09:37","date_gmt":"2023-11-21T13:09:37","guid":{"rendered":"https:\/\/puertasroper.com\/productos\/puerta-corredera-industrial\/"},"modified":"2024-01-23T18:32:55","modified_gmt":"2024-01-23T17:32:55","slug":"industrial-sliding-door","status":"publish","type":"product","link":"https:\/\/puertasroper.com\/eng\/products\/industrial-sliding-door\/","title":{"rendered":"INDUSTRIAL SLIDING DOOR"},"content":{"rendered":"
Technical Data Sheet<\/strong> Supported horizontal sliding industrial door by ROPER with upper and lower guides and a steel structure, consisting of the following elements. Its operation is based on one or more rigid leaves that, when opening or closing, move horizontally, supported by the upper guide with rollers and guided at all times by the lower part.<\/p>\n Blade<\/strong><\/p>\n The fence made of a cold-rolled tube frame and braced on the inside with tubular reinforcements to prevent buckling and increase wind resistance.<\/p>\n The tubes used to manufacture this type of doors are the following:<\/p>\n DECAPADOS Tubes<\/strong><\/p>\n 60×30, 80×40, or 100×40 tubes of quality E-220 according to UNE EN 10305-5 standard.<\/p>\n GALVANIZED Tubes<\/strong><\/p>\n 60×30, 80×40, or 100×40 tubes of quality E-220 + Z-275-NAC according to UNE EN 10305-5 standard.<\/p>\n Closing of the Leaf<\/strong><\/p>\n The Industrial Tilting Door is manufactured with two types of different leaf enclosures:<\/p>\n Sheet<\/strong><\/p>\n The sheets are made of pre-lacquered steel strip, DX51 according to EN-10142 standard, with an average thickness of 0.6 mm without a peelable film, ribbed in 200 mm modules, placed in a vertical or horizontal position, assembled under compression and welded to the frame of the sheet.<\/p>\n Sandwich Panel<\/strong><\/p>\n Panel of 40 mm thickness. It is used for its manufacture, pre-lacquered sheet on galvanized steel, according to the EN-10142 standard. The interior of the panel is composed of expanded polyurethane with an average density of 40 kg\/m\u00b3, free of CFC and HCFC. Two panel formats are used, one with a height of 500 mm and another with 610 mm.<\/p>\n Guides<\/strong><\/p>\n In this type of doors, we distinguish between upper and lower guides:<\/p>\n Upper Guides<\/strong><\/p>\n Formed by a galvanized steel sheet profile with a thickness of 3 or 4 mm, cold-rolled, depending on the dimensions and weight of the door. The following qualities are used:<\/p>\n Lower Guides<\/strong><\/p>\n Depending on the dimensions and use, these guides can be either:<\/p>\n Locking System<\/strong><\/p>\n The closure is carried out by vertical bolts that act on the lower guide and can be of rod diameters \u00d8 12, \u00d8 16, or \u00d8 18.<\/p>\n Upper Rollers<\/strong><\/p>\n Rollers made of polyamide with an internal bearing.<\/p>\n Lower Wheels<\/strong><\/p>\n Made of cast steel with a solid steel shaft.<\/p>\n The quality of this door is endorsed by tests carried out in accredited laboratories, in accordance with the product standard EN 13241-1, and is marked for both manual and automatic versions. The parts used in the door and its finish depend on the door’s dimensions, variant, and the opening available at the site. Possible changes may also depend on improvements in production processes.<\/p>\n Technical Data Sheet Sliding Hanging Industrial Door<\/strong><\/p>\n Horizontal Hanging Sliding Industrial Door by Roper with upper and lower guides and a steel structure, consisting of the following elements.<\/p>\n Its operation is based on one or more rigid leaves that, when opening or closing, move horizontally, supported by the upper guide through hangers that slide on both sides and guided at all times by the bottom part.<\/p>\n Blade<\/strong><\/p>\n The fence made of a cold-rolled tube frame and braced on the inside with tubular reinforcements to prevent buckling and increase wind resistance.<\/p>\n The tubes used to manufacture this type of doors are the following:<\/p>\n DECAPADOS:<\/strong> Tubes of 60×30, 80×40, or 100×40 of quality E-220 according to UNE EN 10305-5.<\/p>\n GALVANIZED:<\/strong> Tubes of 60×30, 80×40, or 100×40 of quality E-220 + Z-275-NAC according to UNE EN 10305-5.<\/p>\n Closing of the Leaf:<\/strong><\/p>\n The Industrial Folding Door is manufactured with two different types of leaf enclosures:<\/p>\n Sheet:<\/strong> The sheets are made from pre-lacquered steel strips, DX51 according to the EN-10142 standard, with an average thickness of 0.6 mm, without peelable film, ribbed in 200 mm modules, positioned vertically or horizontally, and compression-welded to the frame of the sheet.<\/p>\n Sandwich Panel:<\/strong> Panel of 40 mm thickness. It is used for its manufacturing with pre-lacquered sheet on galvanized steel, according to the EN-10142 standard. The interior of the panel is composed of expanded polyurethane with an average density of 40 kg\/m\u00b3, free from CFC and HCFC. Two panel formats are used, one with a height of 500 mm and another with a height of 610 mm.<\/p>\n<\/div>\n<\/div>\n<\/div>\n
\nTechnical Data Sheet Industrial Supported Sliding Door<\/strong><\/p>\n
<\/p>\n
<\/p>\n\n
\n
<\/p>\n