COMMUNITY SECTIONAL GARAGE DOOR
The ROPER Community Sectional Garage Door combines quality and aesthetics, making it ideal for small residential communities. This sectional garage door operates smoothly and quietly, ensuring that users hardly notice its opening and closing maneuvers.
Features:
Recommended for small communities. Elegant. Modern. Space-saving, leaving the available space free. High quality. Convenient, as it can be automated to adapt to various uses.
Do you have any doubt?
Product Details:
Door Type:
No. Sheets:
Around:
Leaf:
The leaf is made of residential or industrial sandwich panel (depending on the variant) with a thickness of 40 mm. For its manufacturing, pre-lacquered sheet metal is used on galvanized steel, following EN-10142 standards. The interior of the panel consists of expanded polyurethane with an average density of 40 kg/m³, free from CFC and HCFC. Two panel formats are used, one with a height of 500 mm and another with 610 mm.
Technical Data Sheet for Standard Sectional Garage Door
The outer face of the panels is available in pre-lacquered sheet metal in the following colors: RAL 9010, RAL 8014, RAL 9006, RAL 6005, RAL 7024, RAL 3000, and RAL 5010. It is also available in light oak and dark oak wood imitation. Other colors will be supplied painted according to the classic RAL color chart with a two-component paint (base/catalyst). The interior of the panel will be provided in white.
Transmission: Shaft, springs, and lintel/tube are fully assembled to facilitate the door installation on-site. Springs are made of EN 10270-1 steel, SH class, and are phosphate-treated. The springs are accompanied by anti-breakage spring systems to prevent the door from falling in case of spring breakage.
Lintel and Guides: The lintel is manufactured from galvanized sheet metal according to EN-10142 standards. If the vertical guides are made of sheet metal, they are manufactured from galvanized steel sheet metal according to EN-10142 standards. The finish of the lintel and guides can be galvanized or pre-lacquered or painted (depending on the chosen door color).
If the vertical guides are tube with an angle, the finish can be galvanized or painted. The horizontal and vertical guides are made of galvanized steel sheet metal according to EN-10142 standards. The assembly can be fully visible without the need for a subframe. The edges of the guides are rounded to prevent cuts.
Cables: Depending on the dimensions of the leaf, cables with diameters of 3 mm, 4 mm, and 5 mm are used. All cables have a 6×19+1 composition and comply with DIN 3060 standards.
Delivery: The door is delivered pre-assembled to 60%, wrapped in plastic, and includes two MDF sheets for the bottom and front, in either one or three packages:
One package: guides, lintel with transmission, panels, and accessories. Three packages: guides and lintel with transmission, panels, accessories.
The quality of this door is endorsed by tests conducted in accredited laboratories, following product standard EN 13241-1, and it is marked for both manual and automatic versions. Both the components used in the door and its finish will depend on the dimensions of the door, its variant, and the opening available at the construction site. They may also be subject to possible changes to improve production processes.
Leaf:
The leaf is made of residential or industrial sandwich panel (depending on the variant) with a thickness of 40 mm. For its manufacturing, pre-lacquered sheet metal is used on galvanized steel, following EN-10142 standards. The interior of the panel consists of expanded polyurethane with an average density of 40 kg/m³, free from CFC and HCFC. Two panel formats are used, one with a height of 500 mm and another with 610 mm.
The exterior face of the panels is available in pre-lacquered sheet metal in the following colors: RAL 9010, RAL 8014, RAL 9006, RAL 6005, RAL 7024, RAL 3000, and RAL 5010. It is also available in light oak and dark oak wood imitation. Other colors will be provided painted according to the classic RAL color chart with a two-component paint (base/catalyst).
The interior of the panel will be provided in white.
For doors with a leaf area of 16 m² or more, cable breakage devices will be installed to prevent the door from falling in case one of the cables breaks.
Transmission: The shaft, springs, and lintel/tube are fully assembled to facilitate door installation on-site. Springs are made of EN 10270-1 steel, SH class, and are phosphate-treated. The springs are accompanied by anti-breakage spring systems to prevent the door from falling in case of spring breakage.
Lintel and Guides: If the vertical guides or lintel are made of sheet metal, they are manufactured from galvanized steel sheet metal according to EN-10142 standards. In this case, the finish of the guides and lintel can be galvanized or pre-lacquered or painted (depending on the chosen door color). If the vertical guides are tube, they will be made of galvanized tube. In this case, the finish can be galvanized or painted.
If the lintel is a tube, a closing tube will be provided to be placed at the top of the leaf, and a galvanized tube or UPN (depending on the dimensions) will be provided to attach the plates with the transmission. The closing tube will have the same finish as the vertical guides.
Horizontal and vertical guides are made of galvanized steel sheet metal according to EN-10142 standards. The assembly can be fully visible without the need for a subframe. The edges of the guides are rounded to prevent cuts.
Cables: Depending on the dimensions of the leaf, cables with diameters of 3 mm, 4 mm, and 5 mm are used. All cables have a 6×19+1 composition and comply with DIN 3060 standards.
Delivery: The door is delivered pre-assembled to 60%, wrapped in plastic, and includes two MDF sheets for the bottom and front, in either one or three packages:
One package: guides, lintel with transmission, panels, and accessories. Three packages: guides and lintel with transmission, panels, accessories.
The quality of this door is endorsed by tests conducted in accredited laboratories, following product standard EN 13241-1, and it is marked for both manual and automatic versions. Both the components used in the door and its finish will depend on the dimensions of the door, its variant, and the opening available at the construction site. They may also be subject to possible changes to improve production processes. Technical Data Sheet
Technical Data for Reduced Headroom Sectional Garage Door
The door features a leaf made of sandwich panel, vertical sheet or tube guides, and a sheet lintel. It is mechanically operated using torsion spring/s fixed to the lintel, which rotate two drums where the cable is wound and secured to the bottom of the leaf. This leaf, guided by rollers, runs along metal guides until it is in a horizontal position. Optionally, the guides can be tilted to adapt to the roof slope as much as possible. The manual operation of the door can be replaced by the installation of an electrical system.
The perimeter of the leaf is sealed by placing rubber gaskets, making the interior “semi-sealed.”
Leaf:
The leaf is made of residential or industrial sandwich panel (depending on the variant) with a thickness of 40 mm. For its manufacturing, pre-lacquered sheet metal is used on galvanized steel, following EN-10142 standards. The interior of the panel consists of expanded polyurethane with an average density of 40 kg/m³, free from CFC and HCFC. Two panel formats are used, one with a height of 500 mm and another with 610 mm.
Technical Data Sheet for Standard Sectional Garage Door
The outer face of the panels is available in pre-lacquered sheet metal in the following colors: RAL 9010, RAL 8014, RAL 9006, RAL 6005, RAL 7024, RAL 3000, and RAL 5010. It is also available in light oak and dark oak wood imitation. Other colors will be supplied painted according to the classic RAL color chart with a two-component paint (base/catalyst). The interior of the panel will be provided in white.
Transmission: Shaft, springs, and lintel/tube are fully assembled to facilitate the door installation on-site. Springs are made of EN 10270-1 steel, SH class, and are phosphate-treated. The springs are accompanied by anti-breakage spring systems to prevent the door from falling in case of spring breakage.
Lintel and Guides: The lintel is manufactured from galvanized sheet metal according to EN-10142 standards. If the vertical guides are made of sheet metal, they are manufactured from galvanized steel sheet metal according to EN-10142 standards. The finish of the lintel and guides can be galvanized or pre-lacquered or painted (depending on the chosen door color).
If the vertical guides are tube with an angle, the finish can be galvanized or painted. The horizontal and vertical guides are made of galvanized steel sheet metal according to EN-10142 standards. The assembly can be fully visible without the need for a subframe. The edges of the guides are rounded to prevent cuts.
Cables: Depending on the dimensions of the leaf, cables with diameters of 3 mm, 4 mm, and 5 mm are used. All cables have a 6×19+1 composition and comply with DIN 3060 standards.
Delivery: The door is delivered pre-assembled to 60%, wrapped in plastic, and includes two MDF sheets for the bottom and front, in either one or three packages:
One package: guides, lintel with transmission, panels, and accessories. Three packages: guides and lintel with transmission, panels, accessories.
The quality of this door is endorsed by tests conducted in accredited laboratories, following product standard EN 13241-1, and it is marked for both manual and automatic versions. Both the components used in the door and its finish will depend on the dimensions of the door, its variant, and the opening available at the construction site. They may also be subject to possible changes to improve production processes.
Leaf:
The leaf is made of residential or industrial sandwich panel (depending on the variant) with a thickness of 40 mm. For its manufacturing, pre-lacquered sheet metal is used on galvanized steel, following EN-10142 standards. The interior of the panel consists of expanded polyurethane with an average density of 40 kg/m³, free from CFC and HCFC. Two panel formats are used, one with a height of 500 mm and another with 610 mm.
The exterior face of the panels is available in pre-lacquered sheet metal in the following colors: RAL 9010, RAL 8014, RAL 9006, RAL 6005, RAL 7024, RAL 3000, and RAL 5010. It is also available in light oak and dark oak wood imitation. Other colors will be provided painted according to the classic RAL color chart with a two-component paint (base/catalyst).
The interior of the panel will be provided in white.
For doors with a leaf area of 16 m² or more, cable breakage devices will be installed to prevent the door from falling in case one of the cables breaks.
Transmission: The shaft, springs, and lintel/tube are fully assembled to facilitate door installation on-site. Springs are made of EN 10270-1 steel, SH class, and are phosphate-treated. The springs are accompanied by anti-breakage spring systems to prevent the door from falling in case of spring breakage.
Lintel and Guides: If the vertical guides or lintel are made of sheet metal, they are manufactured from galvanized steel sheet metal according to EN-10142 standards. In this case, the finish of the guides and lintel can be galvanized or pre-lacquered or painted (depending on the chosen door color). If the vertical guides are tube, they will be made of galvanized tube. In this case, the finish can be galvanized or painted.
If the lintel is a tube, a closing tube will be provided to be placed at the top of the leaf, and a galvanized tube or UPN (depending on the dimensions) will be provided to attach the plates with the transmission. The closing tube will have the same finish as the vertical guides.
Horizontal and vertical guides are made of galvanized steel sheet metal according to EN-10142 standards. The assembly can be fully visible without the need for a subframe. The edges of the guides are rounded to prevent cuts.
Cables: Depending on the dimensions of the leaf, cables with diameters of 3 mm, 4 mm, and 5 mm are used. All cables have a 6×19+1 composition and comply with DIN 3060 standards.
Delivery: The door is delivered pre-assembled to 60%, wrapped in plastic, and includes two MDF sheets for the bottom and front, in either one or three packages:
One package: guides, lintel with transmission, panels, and accessories. Three packages: guides and lintel with transmission, panels, accessories.
The quality of this door is endorsed by tests conducted in accredited laboratories, following product standard EN 13241-1, and it is marked for both manual and automatic versions. Both the components used in the door and its finish will depend on the dimensions of the door, its variant, and the opening available at the construction site. They may also be subject to possible changes to improve production processes.
Do you have any doubt?
Press the button and one of our technicians will call you as soon as possible and answer all your questions. Opening hours: Monday to Friday from 08:00 to 18:00
