INDUSTRIAL SLIDING DOOR

Technical Data Sheet
Technical Data Sheet Industrial Supported Sliding Door

Supported horizontal sliding industrial door by ROPER with upper and lower guides and a steel structure, consisting of the following elements. Its operation is based on one or more rigid leaves that, when opening or closing, move horizontally, supported by the upper guide with rollers and guided at all times by the lower part.

Blade

The fence made of a cold-rolled tube frame and braced on the inside with tubular reinforcements to prevent buckling and increase wind resistance.

The tubes used to manufacture this type of doors are the following:

DECAPADOS Tubes

60×30, 80×40, or 100×40 tubes of quality E-220 according to UNE EN 10305-5 standard.

GALVANIZED Tubes

60×30, 80×40, or 100×40 tubes of quality E-220 + Z-275-NAC according to UNE EN 10305-5 standard.

Closing of the Leaf

The Industrial Tilting Door is manufactured with two types of different leaf enclosures:

Sheet

The sheets are made of pre-lacquered steel strip, DX51 according to EN-10142 standard, with an average thickness of 0.6 mm without a peelable film, ribbed in 200 mm modules, placed in a vertical or horizontal position, assembled under compression and welded to the frame of the sheet.

Sandwich Panel

Panel of 40 mm thickness. It is used for its manufacture, pre-lacquered sheet on galvanized steel, according to the EN-10142 standard. The interior of the panel is composed of expanded polyurethane with an average density of 40 kg/m³, free of CFC and HCFC. Two panel formats are used, one with a height of 500 mm and another with 610 mm.

Guides

In this type of doors, we distinguish between upper and lower guides:

Upper Guides

Formed by a galvanized steel sheet profile with a thickness of 3 or 4 mm, cold-rolled, depending on the dimensions and weight of the door. The following qualities are used:

• 3 quality DX51D
• 4 quality S275JR

Lower Guides

Depending on the dimensions and use, these guides can be either:

• Cold-rolled profile with a thickness of 2.5 mm, quality DX51D
• Solid 25×12 or 25×25 mounted on UPN 80×45

Locking System

The closure is carried out by vertical bolts that act on the lower guide and can be of rod diameters Ø 12, Ø 16, or Ø 18.

Upper Rollers

Rollers made of polyamide with an internal bearing.

Lower Wheels

Made of cast steel with a solid steel shaft.

The quality of this door is endorsed by tests carried out in accredited laboratories, in accordance with the product standard EN 13241-1, and is marked for both manual and automatic versions. The parts used in the door and its finish depend on the door’s dimensions, variant, and the opening available at the site. Possible changes may also depend on improvements in production processes.

Technical Data Sheet Sliding Hanging Industrial Door

Horizontal Hanging Sliding Industrial Door by Roper with upper and lower guides and a steel structure, consisting of the following elements.

Its operation is based on one or more rigid leaves that, when opening or closing, move horizontally, supported by the upper guide through hangers that slide on both sides and guided at all times by the bottom part.

Blade

The fence made of a cold-rolled tube frame and braced on the inside with tubular reinforcements to prevent buckling and increase wind resistance.

The tubes used to manufacture this type of doors are the following:

Guides: In this type of doors, we distinguish between upper and lower guides:

Upper Guides: Formed by galvanized steel sheet profile with a thickness of 3 or 4 mm cold-rolled, depending on the dimensions and weight, of the following qualities: 3 quality DX51D, 4 quality S275JR.

Lower Guides: Depending on the dimensions and use, these guides can be:

• Cold-rolled profile with a thickness of 2.5 mm, quality DX51D.
• Solid 25×12 or 25×25 mounted on UPN 80×45.

Closing System: The closure is carried out by vertical bolts that act on the lower guide and can be Ø 12, Ø 16, or Ø 18 rods. Upper pulleys: Pulleys made of polyamide with an internal bearing.

Lower Wheels: Made of cast steel with a solid steel shaft.

The quality of this door is backed by tests carried out in accredited laboratories, following the EN 13241-1 product standard, and is marked for both its manual and automatic versions. The components used in the door and its finish will depend on the dimensions of the door, its variant, and the opening available on site. They will also depend on possible changes due to improving production processes.

Technical Data Sheet – Hanging Sliding Industrial Door: Horizontal hanging sliding industrial door by Roper with upper and lower guides and steel structure, formed by the following elements.

Its operation is based on one or more rigid leaves that, when opened or closed, move horizontally held by hangers sliding towards both sides and guided at all times by the lower part.

Blade

The fence made of a cold-rolled tube frame and braced on the inside with tubular reinforcements to prevent buckling and increase wind resistance.

The tubes used to manufacture this type of doors are the following:

DECAPADOS: Tubes of 60×30, 80×40, or 100×40 quality E-220 according to UNE EN 10305-5 standard.

GALVANIZED: Tubes of 60×30, 80×40, or 100×40 quality E-220 + Z-275-NAC according to UNE EN 10305-5 standard.

Closing of the Leaf:

The Industrial Tilting Door is manufactured with two different types of leaf enclosures:

• Sheet: The sheets are made of pre-lacquered steel strip, DX51 according to EN-10142 standard, with an average thickness of 0.6 mm without a peelable film, ribbed in 200 mm modules, placed in a vertical or horizontal position, assembled under compression welded to the frame of the sheet.
• Sandwich Panel: 40 mm thick. It is used for its manufacture, pre-lacquered sheet on galvanized steel, according to EN-10142 standard. The interior of the panel is composed of expanded polyurethane with an average density of 40 kg/m³, free of CFC and HCFC. Two panel formats are used, one with a height of 500 mm and another with 610 mm.