puerta-basculante-2-hojas-industrial (2)

puerta-basculante-2-hojas-industrial (1)

INDUSTRIAL 2 LEAVES SWING DOOR

Two-Leaf Industrial Swing Door

The Two-Leaf Industrial Swing Door is the most widely used in industrial buildings (warehouses, factories, etc.). Its operation is based on two leaves that, when opened, fold, controlled at all times by counterweights. They can be manufactured with counterweight on one side or on both sides. This type of door, like all industrial doors, can be made manual or automatic.

Features:

Functionality: Simple handling and smooth operation.
Robustness: Due to its compact structure.
Wide Range of Automations: Offering versatility.
Durability: Built to last.
Convenience: Can be automated to adapt to various types of use.

Do you have any doubt?

Product Details:

Door Type:

Swing-out

No. Sheets:

Dos

Around:

Industrial

Descripción

Vertical ROPER Tilting Industrial Door with side guides and tubular steel structure, controlled by counterweights. Its operation is based on two articulated leaves that, when opened, fold vertically, attached to the guide by a head and guided by rollers that slide along the side guides, controlled at all times by counterweights through a system of pulleys and cables. . These counterweights can be housed in drawers in the area of the opening or hidden behind the buttresses covered by linings.

Blade The fence made of a cold-rolled tube frame and braced on the inside with tubular reinforcements to prevent buckling and increase wind resistance. The tubes used to manufacture this type of doors are the following:

DECAPADOS Tubos de 60×30, 80×40 ó 100×40 de calidad E-220 según norma UNE EN 10305-5.
GALVANIZADOS Tubos de 60×30, 80×40 ó 100×40 de calidad E-220 + Z-275-NAC según norma UNE EN 10305-5.

Closing of the leaf

The ROPER Industrial Folding Door is manufactured with three different types of leaf enclosures:

Sheet Metal: The sheets are made of pre-painted steel strip, DX51 according to standard EN-10142, with a medium thickness of 0.6 mm without peelable film. The sheets are profiled in 200 mm modules, placed vertically or horizontally, and compression-welded to the leaf frame.
Sandwich Panel: Roper Panel with a thickness of 40 mm. It is manufactured using pre-painted sheet metal on galvanized steel, according to standard EN-10142. The interior of the panel consists of expanded polyurethane with an average density of 40 kg/m³, free of CFC and HCFC. Two panel formats are used, one with a height of 500 mm and another with a height of 610 mm.
Bars: They are formed by tubes of 20×20, 40×20, 40×30, or 60×30 galvanized, of quality E-220 + Z-275-NAC according to standard UNE EN 10305-5.

Guides The guides are formed by hot-rolled steel UPN of 60 x 30, 80 x 45, or 100 x 50, quality S 275 JR + M according to standard EN 10025-2/2004. Hinges Depending on the dimensions of the door, two different types of hinges are used:

For small doors, the hinges consist of three modules of pickled sheet metal with a thickness of 2.5 mm, stamped in a curl shape with a calibrated rod of Ø 8.
For large doors, the hinges consist of four modules of pickled sheet metal with a thickness of 5 mm, stamped in a curl shape with a calibrated rod of Ø 12.

Locking System The closure is achieved through lateral bolts or an external lock that acts on the lateral bolts. The bolts can be Ø 12 or Ø 18. Heads Depending on the dimensions of the door, two types of heads are used:

For small doors, they are formed by a 6 mm thick steel rim and a Ø 16 bolt.
For large doors, they are formed by an 8 mm thick steel rim and a Ø 25 bolt.

Counterweights The counterweights are made of barite. Their dimensions depend on the size of the door and the space to accommodate them. Pulleys Pulleys are formed from 1.2, 2, or 4 mm thick steel sheet, riveted, and with self-lubricating bearings embedded inside. For large doors, turned iron pulleys are used. Rollers Rollers are made of polyamide or steel, depending on the dimensions or use of the door. Cables Cables can have a thickness of 4, 5, 6, or 7 mm, depending on the weight of the door. They are composed of 6x19s1 and comply with DIN 3060. The quality of this door is backed by tests carried out in accredited laboratories, following the product standard EN 13241-1, and is marked for both the manual and automatic versions. Both the parts used in the door and its finish will depend on the dimensions of the door, its variant, and the opening in the construction. They will also depend on possible changes due to improvements in production processes.

Vertical ROPER Tilting Industrial Door with side guides and tubular steel structure, controlled by counterweights.

Its operation is based on two articulated leaves that, when opened, fold vertically, attached to the guide by a head and guided by rollers that slide along the side guides, controlled at all times by counterweights through a system of pulleys and cables. . These counterweights can be housed in drawers in the area of the opening or hidden behind the buttresses covered by linings.

Blade

The fence made of a cold-rolled tube frame and braced on the inside with tubular reinforcements to prevent buckling and increase wind resistance.

The tubes used to manufacture this type of doors are the following:

DECAPADOS Tubos de 60×30, 80×40 ó 100×40 de calidad E-220 según norma UNE EN 10305-5.
GALVANIZADOS Tubos de 60×30, 80×40 ó 100×40 de calidad E-220 + Z-275-NAC según norma UNE EN 10305-5.

Closing of the leaf

The ROPER Industrial Folding Door is manufactured with three different types of leaf enclosures:

Sheet Metal: The sheets are made of pre-painted steel strip, DX51 according to standard EN-10142, with a medium thickness of 0.6 mm without peelable film. The sheets are profiled in 200 mm modules, placed vertically or horizontally, and compression-welded to the leaf frame.
Sandwich Panel: Roper Panel with a thickness of 40 mm. It is manufactured using pre-painted sheet metal on galvanized steel, according to standard EN-10142. The interior of the panel consists of expanded polyurethane with an average density of 40 kg/m³, free of CFC and HCFC. Two panel formats are used, one with a height of 500 mm and another with a height of 610 mm.
Bars: They are formed by tubes of 20×20, 40×20, 40×30, or 60×30 galvanized, of quality E-220 + Z-275-NAC according to standard UNE EN 10305-5.

Guides

The guides are formed by hot-rolled steel UPN of 60 x 30, 80 x 45, or 100 x 50, quality S 275 JR + M according to standard EN 10025-2/2004.

Hinges

Depending on the dimensions of the door, two different types of hinges are used:

For small doors, the hinges consist of three modules of pickled sheet metal with a thickness of 2.5 mm, stamped in a curl shape with a calibrated rod of Ø 8.
For large doors, the hinges consist of four modules of pickled sheet metal with a thickness of 5 mm, stamped in a curl shape with a calibrated rod of Ø 12.

Locking System

The closure is achieved through lateral bolts or an external lock that acts on the lateral bolts. The bolts can be Ø 12 or Ø 18.

Heads

Depending on the dimensions of the door, two types of heads are used:

For small doors, they are formed by a 6 mm thick steel rim and a Ø 16 bolt.
For large doors, they are formed by an 8 mm thick steel rim and a Ø 25 bolt.

Counterweights

The counterweights are made of barite. Their dimensions depend on the size of the door and the space to accommodate them.

Pulleys

Pulleys are formed from 1.2, 2, or 4 mm thick steel sheet, riveted, and with self-lubricating bearings embedded inside. For large doors, turned iron pulleys are used.

Rollers

Rollers are made of polyamide or steel, depending on the dimensions or use of the door.

Cables

Cables can have a thickness of 4, 5, 6, or 7 mm, depending on the weight of the door. They are composed of 6x19s1 and comply with DIN 3060.

The quality of this door is backed by tests carried out in accredited laboratories, following the product standard EN 13241-1, and is marked for both the manual and automatic versions.

Both the parts used in the door and its finish will depend on the dimensions of the door, its variant, and the opening in the construction. They will also depend on possible changes due to improvements in production processes.

Do you have any doubt?

Press the button and one of our technicians will call you as soon as possible and answer all your questions. Opening hours: Monday to Friday from 08:00 to 18:00

INDUSTRIAL 2 LEAVES SWING DOOR

Door Type:

No. Sheets:

Around:

Related Products

SANDWICH PANEL FOR DOORS

LEVELING RAMP

ROPER MiniDock

Multipurpose Covers

Request a quote