CANCELA SLIDING DOOR
The Sliding Gate is the most commonly used gate in property enclosures, both in industrial areas, communities, and private estates. Its operation is based on the lateral sliding of a leaf on a guide. Sliding Gates can be manual or automatic, with the latter option being the most commonly used.
Features:
- Security
- Finishes adapted to customer preferences
- Convenient for both manual and automatic opening
- Adapted to any type of measurements
Do you have any doubt?
Product Details:
No. Sheets:
Around:
Technical Data Sheet
ROPER Cancela Sliding Door with lower guide, support gantry and tubular steel structure, formed by the following elements.
Its operation is based on a rigid leaf that moves horizontally, supported at all times on a lower guide and without an upper guide. A tubular structure portal is used to support it and prevent the door from collapsing.
Blade
The frame is made of a cold-rolled tube frame. It may have interior bracing formed with tubes to prevent buckling and increase wind resistance.
The tubes used for the manufacturing of this type of doors are as follows:
UNCOATED Tubes of 80×40, 100×40, or 120×60 of quality E-220 according to standard UNE EN 10305-5.
GALVANIZED Tubes of 80×40 or 100×40 of quality E-220 + Z-275-NAC according to standard UNE EN 10305-5.
Enclosure of the Leaf
The Sliding Gate is manufactured with three types of different leaf enclosures:
Guides
Depending on the dimensions and use, they can be:
|
Technical Data Sheet
| ROPER Cancela Sliding Door with lower guide, support gantry and tubular steel structure, formed by the following elements.
Its operation is based on a rigid leaf that moves horizontally, supported at all times on a lower guide and without an upper guide. A tubular structure portal is used to support it and prevent the door from collapsing. Blade The frame is made of a cold-rolled tube frame. It may have interior bracing formed with tubes to prevent buckling and increase wind resistance. The tubes used for the manufacturing of this type of doors are as follows: 
UNCOATED Tubes of 80×40, 100×40, or 120×60 of quality E-220 according to standard UNE EN 10305-5. GALVANIZED Tubes of 80×40 or 100×40 of quality E-220 + Z-275-NAC according to standard UNE EN 10305-5. Enclosure of the Leaf The Sliding Gate is manufactured with three types of different leaf enclosures:
Guides
Depending on the dimensions and use, they can be:
Supporting Structure Formed by a tubular structure with tubes of 100×40 or 120×60 with the characteristics mentioned above, to which supporting pulleys are attached. Supporting Pulleys Pulleys made of polyamide with an internal bearing. Closing System
The closure is carried out by a vertical locking bolt that acts on the lower guide. It is made of Ø18 rod. Lower Wheels Made of cast steel with a solid steel axle. |
Do you have any doubt?
Press the button and one of our technicians will call you as soon as possible and answer all your questions. Opening hours: Monday to Friday from 08:00 to 18:00
