Industrial Sliding Gate Cancela
he Industrial Sliding Gate Cancela is the most commonly used door for closing openings in industrial areas. These doors can be either manual or automatic, with the latter being the most commonly preferred option.
Features:
- Security
- Convenience by automating the doors to adapt to all types of uses.
- Adaptable to all types of openings
- Large dimensions.
Do you have any doubt?
Product Details:
Door Type:
No. Sheets:
Around:
Operation is based on a rigid leaf that moves horizontally, supported at all times by a lower guide and without an upper guide. A tubular structure portal is used to support it and prevent the door from collapsing.
Blade
The frame is made of a cold-rolled tube frame. It may have internal bracing with tubes to prevent buckling and increase wind resistance.
The tubes used to manufacture this type of doors are the following:
DECAPADOS: Tubes of 80×40, 100×40, or 120×60 of E-220 quality according to UNE EN 10305-5 standard.
GALVANIZADOS: Tubes of 80×40 or 100×40 of E-220 + Z-275-NAC quality according to UNE EN 10305-5 standard.
Closing of the leaf
The Industrial Sliding Gate Cancela is manufactured with three different leaf enclosure types:
- Sheet: Sheets are formed by pre-painted steel strip, DX51 according to EN-10142 standard, with an average thickness of 0.6 mm, without peelable film, grooved in 200 mm modules, positioned vertically or horizontally, compression-welded to the leaf frame.
- Sandwich Panel: 40 mm thick panel. It is made by pre-painted sheet on galvanized steel, according to EN-10142 standard. The interior of the panel is composed of expanded polyurethane with an average density of 40 kg/m³, free of CFC and HCFC. Two panel formats are used, one with a height of 500 mm and another with 610 mm.
- Bars: Formed by tubes of 40×30 or 60×30 galvanized with E-220 + Z-275-NAC quality according to UNE EN 10305-5 standard.
Technical Data Sheet
ROPER Cancela Sliding Industrial Door with lower guide, support gantry and tubular steel structure, formed by the following elements.
Operation is based on a rigid leaf that moves horizontally, supported at all times by a lower guide and without an upper guide. A tubular structure portal is used to support it and prevent the door from collapsing.
Blade
The frame is made of a cold-rolled tube frame. It may have internal bracing with tubes to prevent buckling and increase wind resistance.
The tubes used to manufacture this type of doors are the following:
DECAPADOS: Tubes of 80×40, 100×40, or 120×60 of E-220 quality according to UNE EN 10305-5 standard.
GALVANIZADOS: Tubes of 80×40 or 100×40 of E-220 + Z-275-NAC quality according to UNE EN 10305-5 standard.
Closing of the leaf
The Industrial Sliding Gate Cancela is manufactured with three different leaf enclosure types:
- Sheet: Sheets are formed by pre-painted steel strip, DX51 according to EN-10142 standard, with an average thickness of 0.6 mm, without peelable film, grooved in 200 mm modules, positioned vertically or horizontally, compression-welded to the leaf frame.
- Sandwich Panel: 40 mm thick panel. It is made by pre-painted sheet on galvanized steel, according to EN-10142 standard. The interior of the panel is composed of expanded polyurethane with an average density of 40 kg/m³, free of CFC and HCFC. Two panel formats are used, one with a height of 500 mm and another with 610 mm.
- Bars: Formed by tubes of 40×30 or 60×30 galvanized with E-220 + Z-275-NAC quality according to UNE EN 10305-5 standard.
Depending on the dimensions and use, they can be:
- Cold-rolled profile with a thickness of 2.5 mm, quality DX51D.
- Solid 25×12 or 25×25 mounted on UPN of 80×45.
Supporting Portal
Formed by a tubular structure with tubes of 100×40 or 120×60 with the characteristics mentioned earlier, to which supporting pulleys are attached.
Supporting Pulleys
Pulleys made of polyamide with an internal bearing.
Closing System
The closure is carried out by a vertically interlocking bolt that acts on the lower guide. It is made of Ø18 steel rod.
Lower Wheels
Made of cast steel with a solid steel shaft.
Do you have any doubt?
Press the button and one of our technicians will call you as soon as possible and answer all your questions. Opening hours: Monday to Friday from 08:00 to 18:00
